Plumbing problems are a common concern for homeowners across Canada. With harsh winters, ageing infrastructure, and frequent use of modern fixtures, it’s no surprise that plumbing systems can sometimes break down. In this blog, we’ll walk you through the top 10 plumbing problems in Canada and how you can solve them quickly and efficiently.
1. Frozen Pipes
Why It Happens:
In many parts of Canada, especially during winter, water inside pipes can freeze due to extreme cold. Frozen water expands, which can cause pipes to burst.
How to Fix:
- Turn off the water supply immediately.
- Use a hair dryer or space heater to thaw the pipe gently.
- Avoid using open flames or boiling water.
Pro Tip: To prevent freezing, insulate exposed pipes and keep your home heated above 10°C during cold months.
Need emergency help? PeakFlow Plumbing 24 offers 24/7 response for frozen or burst pipes.
2. Clogged Drains
Why It Happens:
Drains can get blocked by hair, soap scum, grease, and food particles. This slows water drainage and causes unpleasant odours.
How to Fix:
- Use a plunger or a drain snake to remove clogs.
- Pour a mix of baking soda and vinegar, followed by hot water.
Note: Chemical drain cleaners may damage older pipes, so use with caution.
If the clog keeps returning, call PeakFlow Plumbing 24 for a thorough inspection.
3. Leaky Faucets
Why It Happens:
A worn-out washer, corroded valve seat, or loose parts can cause dripping faucets.
How to Fix:
- Turn off the water supply.
- Disassemble the faucet and replace the washer or cartridge.
- Reassemble and test for leaks.
A small drip can waste up to 20 litres of water per day. Fix it early to save water and money.
4. Running Toilets
Why It Happens:
A faulty flapper valve or damaged float can cause water to continuously run into the toilet bowl.
How to Fix:
- Open the tank and check if the flapper is sealing properly.
- Replace worn or damaged components.
If unsure, our team at PeakFlow Plumbing 24 can quickly diagnose and fix toilet leaks—saving you from rising water bills.
5. Low Water Pressure
Why It Happens:
Low pressure can be due to clogged aerators, hidden leaks, or aging pipes.
How to Fix:
- Unscrew and clean faucet aerators.
- Check for visible leaks under sinks or behind walls.
- If the problem is widespread, you may need a professional inspection.
We recommend calling PeakFlow Plumbing 24 to assess and upgrade your plumbing system for consistent pressure.
6. Water Heater Issues
Why It Happens:
Lack of hot water, strange noises, or rusty water can signal a failing water heater.
How to Fix:
- Flush the tank to remove sediment build-up.
- Check the thermostat settings.
- Replace the anode rod or heating element if necessary.
For both tank and tankless water heater repairs, our certified plumbers can help restore comfort fast.
7. Sump Pump Failure
Why It Happens:
Sump pumps fail due to power outages, stuck switches, or clogged discharge lines, especially during storms.
How to Fix:
- Clear the pump basin and test the float switch.
- Install a battery backup for emergencies.
Don’t wait until your basement floods. PeakFlow Plumbing 24 can inspect and maintain your sump pump annually.
8. Burst Pipes
Why It Happens:
Burst pipes are often a result of freezing, corrosion, or high water pressure.
How to Fix:
- Shut off the main water valve.
- Open taps to relieve pressure.
- Call a licensed plumber for pipe replacement.
This is a serious plumbing emergency. Our Ontario-based team at PeakFlow Plumbing 24 is equipped to handle it quickly.
9. Sewer System Backup
Why It Happens:
Tree roots, broken pipes, or grease blockages can cause wastewater to back up into your home.
Warning Signs:
- Gurgling toilets
- Slow drains in multiple fixtures
- Foul sewage odour
How to Fix:
- Avoid flushing non-flushable items.
- Schedule regular sewer line inspections.
We use video inspection and hydro-jetting to clean and clear sewer lines efficiently.
10. Pipe Corrosion and Ageing Infrastructure
Why It Happens:
In older Canadian homes, galvanised steel or lead pipes can corrode, leak, or contaminate your water.
How to Fix:
- Inspect for signs of rust or water discolouration.
- Upgrade to PEX or copper piping.
PeakFlow Plumbing 24 offers complete repiping services for older homes in Ontario—ensuring safety and water quality.
Why Choose PeakFlow Plumbing 24?
When plumbing problems strike, you need a dependable team that acts fast. That’s where PeakFlow Plumbing 24 comes in.
Expert Plumbing Solutions: From minor leaks to full system repairs
Serving Ontario: Covering every major city and suburb
Reliable & Cost-Effective: High-quality work at affordable rates
Emergency Services: 24/7 availability when you need it most
We proudly serve homeowners and businesses throughout Ontario, keeping your plumbing system running smoothly no matter the season.
Need a Plumber in Ontario?
Contact PeakFlow Plumbing 24 today for reliable, same-day service.
Your comfort, safety, and satisfaction are always our top priorities.
Call Us Now: 437-933-0242
Conclusion
Dealing with plumbing problems can be stressful, but knowing the causes and solutions can help you act quickly and save money. Whether it’s a leaky faucet or a serious pipe burst, don’t wait too long to fix the issue.
